IAS 2 normal capacity: factory overhead with worked examples

Allocate fixed factory costs, expense unused capacity, and reconcile production cost through inventory and sales.

What does IAS 2 normal capacity change in inventory costing?

A quiet production month can make the cost of each finished unit look unusually high. The IAS 2 normal capacity rule helps you decide how much fixed factory overhead belongs in inventory and how much belongs in the current period’s expenses. The decision matters whenever a factory keeps paying for facilities and supervision while producing fewer units.

Start with a simple distinction. A cost can relate to the factory and still fail to qualify for full allocation to the units made this month. Allocating every fixed cost across a small production run would push unused-capacity costs into inventory. Some of that cost could then remain on the statement of financial position until the goods are sold.

This guide follows two fictional Saudi manufacturers from the production report to the accounting entries. All amounts are in SAR, the businesses are invented, and taxes are excluded to keep the allocation clear. Both cases use one homogeneous product, no opening inventory, no work in progress, no abnormal waste, and net realisable value above cost. Those assumptions let us isolate production volume without mixing in other valuation problems.

The [IFRS Foundation’s IAS 2 overview](https://www.ifrs.org/issued-standards/list-of-standards/ias-2-inventories/) explains the broader inventory framework. Here the specific question is which production costs reach finished goods before you apply [inventory cost formulas](/learn/inventory-valuation-methods-ifrs). Choosing FIFO or weighted average does not by itself solve an overhead-allocation error.

How do you establish IAS 2 normal capacity before calculating a rate?

Use the output reasonably expected across several ordinary periods or seasons, with planned maintenance reflected in that expectation. A machine’s theoretical maximum and a sales team’s ambitious target are different measures. The production plan needs an operating explanation that another accountant can follow.

For a small factory file, gather historical output, maintenance schedules, shift patterns, and evidence of lasting changes in operations. Compare equivalent periods: annual overhead should be matched with an annual capacity measure, or allocated consistently to an appropriate seasonal schedule. Dividing annual costs by one month’s production creates a unit mismatch before any accounting judgment begins.

For one identical product, units may be a sensible allocation base. A plant making products with very different processing times may need machine hours or another rational measure. These examples use units because every item consumes the same production resources. They do not prescribe a single allocation base for all manufacturers.

Separate the cost pool as well. Factory [depreciation](/glossary#depreciation) and production supervision can be fixed overhead; indirect supplies used with production can be variable overhead. Sales commissions and unrelated head-office costs do not become manufacturing costs just because management wants to recover them in selling prices.

IAS 2 paragraphs 12–13 address conversion costs and capacity allocation. Paragraph 16 identifies excluded costs. The [current AASB 102 compilation incorporating IAS 2](https://standards.aasb.gov.au/aasb-102-dec-2021) reproduces those requirements; its Australian-specific paragraphs are outside this guide’s scope. Record the evidence for your denominator alongside the cost schedule so the next reviewer can reproduce the decision.

Worked example 1: how does low output affect a Dammam factory?

Dammam Packaging makes identical reusable containers. Its supported normal output for the month is 10,000 units. A temporary order slowdown reduces actual completed production to 6,000 units. Qualifying fixed production overhead actually incurred is SAR 120,000. Direct materials and direct labour together cost SAR 40 per unit, while variable production overhead is SAR 10 per unit. All 6,000 units are completed in the month.

The fixed rate is 120,000 ÷ 10,000 = SAR 12 per unit. Apply that rate to the 6,000 units actually produced: SAR 72,000 reaches production cost. The remaining SAR 48,000 is expensed in the period. The low output does not justify increasing the rate to SAR 20 to absorb every riyal.

Suppose the factory sells 4,500 units and holds 1,500 at month end. Cost attached to the sold units is 4,500 × 62 = SAR 279,000. Closing inventory is 1,500 × 62 = SAR 93,000. The separate SAR 48,000 capacity expense remains a current-period charge even though some containers remain unsold.

Check the full cost reconciliation: 279,000 + 93,000 + 48,000 = SAR 420,000. This equals the SAR 240,000 direct costs, SAR 60,000 variable overhead, and SAR 120,000 fixed overhead incurred. Every cost has a destination, and the inventory balance carries only the eligible part. The reconciliation is useful because an apparently reasonable unit cost can still hide a missing expense.

Which entries record allocated and unallocated factory overhead?

Assume Dammam Packaging has already accumulated the SAR 120,000 fixed costs in a fixed production overhead control account. That earlier posting credits the appropriate accounts, such as accumulated depreciation or payables. The allocation below clears the control account; it does not record those costs a second time. The [journal entry](/glossary#journal-entry) separates the part assigned to production from the unused-capacity expense.

Direct materials, direct labour, and variable overhead of SAR 300,000 have also been charged to work in progress through their appropriate entries. Completion then transfers the full SAR 372,000 from work in progress to finished goods. With no unfinished units, the work-in-progress balance for this batch is zero.

The sale also requires a separate revenue entry based on the actual transaction. We omit it because no selling price is assumed. The finished-goods balance after the cost transfer is SAR 93,000.

Keep the capacity expense identifiable in the supporting schedule even if financial-statement presentation aggregates it with other production expenses. This example’s separate ledger account is a practical tracing choice, not a claim that IAS 2 always requires a dedicated face-of-statement line. For the broader movement from inventory to expense, use the [cost of goods sold guide](/learn/how-to-calculate-cogs).

Worked example 2: what changes when production is abnormally high?

Riyadh Components normally makes 8,000 identical fittings per month. An exceptional customer order increases completed production to 12,000 fittings, a level assessed as abnormally high for this case. Actual qualifying fixed production overhead remains SAR 96,000. Direct materials and labour are SAR 30 per fitting, and variable overhead is SAR 5 per fitting. No opening inventory or work in progress complicates the calculation.

Using the ordinary SAR 12 rate from 96,000 ÷ 8,000 would allocate SAR 144,000 to output. That would exceed actual fixed overhead by SAR 48,000. Reduce the fixed rate to 96,000 ÷ 12,000 = SAR 8 per fitting so the goods do not carry costs that were never incurred.

If 9,000 fittings are sold and 3,000 remain, the sold units carry SAR 387,000 and closing inventory carries SAR 129,000. Together they reconcile to SAR 516,000 of actual production costs. The fixed-overhead allocation debits work in progress and credits the fixed overhead control account by SAR 96,000. Completion transfers SAR 516,000 to finished goods; the cost-of-sales entry transfers SAR 387,000 out.

A busy month can still involve overtime premiums, abnormal waste, or extra supervision. Our fixed cost stays unchanged only because the case states that fact. In a real file, check what actually happened before copying the SAR 8 rate. The important constraint is that abnormal output must not manufacture additional inventory cost through the allocation formula.

How should the closing file explain the effect on profit?

The capacity decision affects both inventory and expenses in the [income statement](/glossary#income-statement). In the low-output case, capitalising all SAR 120,000 of fixed overhead would produce a unit cost of SAR 70 instead of SAR 62. With 1,500 units unsold, inventory would be SAR 105,000 instead of SAR 93,000. Profit before tax would be overstated by SAR 12,000 under those stated assumptions.

The error is smaller than the full SAR 48,000 unallocated amount because part of the excess cost would already have passed through sold units. That distinction helps you explain the financial-statement effect accurately. A wrong allocation can shift costs between current expense and closing inventory without losing the arithmetic total.

Build a short closing file with the fixed-cost pool, evidence for normal capacity, actual production, the allocation rate, units sold, and units held. Reconcile the cost-control accounts to the production report and investigate unexplained balances. For multiple products, document why the chosen driver reasonably follows resource use.

The resulting cost still needs the ordinary lower-of-cost-and-net-realisable-value assessment. Capacity allocation and recoverability answer separate questions. A correctly costed container may still require a write-down if expected selling proceeds, after relevant completion and selling costs, are insufficient. Conversely, a strong selling price does not permit you to capitalise idle-capacity expense.

Use a final reviewer question: can someone follow the same numbers from incurred cost to production, then to sold and unsold units, without relying on an unexplained balancing adjustment?

What common mistakes distort normal-capacity overhead allocation?

The most tempting error is dividing every fixed cost by actual units in a weak month. It produces a tidy fully absorbed schedule, but it pushes the cost of unused facilities into the goods. Keep the operational explanation next to the calculation so the denominator is a supported estimate.

  • Using maximum engineering capacity automatically. Check ordinary output patterns and planned maintenance before selecting the benchmark.
  • Mixing time periods. Align the cost pool, normal activity, and actual activity in the same schedule.
  • Treating variable overhead like fixed overhead. Trace variable costs to actual production use; do not add an idle-capacity allowance to every cost category.
  • Capitalising unrelated costs. Review the production connection before including head-office, selling, or abnormal-waste amounts.
  • Keeping an inflated rate in an exceptional production surge. Reconcile allocated fixed overhead to the eligible amount actually incurred.
  • Changing normal capacity to remove a variance. Investigate changed operating facts and document the estimate rather than choosing a denominator that delivers a preferred profit.

Standard-cost systems add another review step. IAS 2 paragraph 21 permits standard costing when the result approximates cost. A standard rate therefore needs periodic review; the mere existence of a system-generated variance does not establish that the inventory figure is acceptable.

If the facts are incomplete, identify what is missing. A question that gives overhead and actual units but no normal capacity or basis for judging output may not support a unique fixed-cost allocation. State your assumption clearly instead of presenting an arbitrary denominator as a requirement.

How can you practise the complete calculation on Accountery?

Use the two cases as short working papers. Hide the tables, classify the costs, explain the denominator, and calculate the allocation. Then record the entries and reconcile incurred costs to expenses and closing inventory. Write one sentence explaining why the unused-capacity amount reaches the current period.

Next, change only the number of units sold. The production cost per unit should remain unchanged because sales volume does not change how this completed batch was manufactured. Closing inventory and the cost attached to sold units will change. This variation tests whether you have kept production and sales separate in your reasoning.

For a second variation, change production volume while retaining a supported normal-capacity estimate and explicitly stated fixed costs. Decide whether the facts describe low, approximately normal, or abnormally high production before recalculating. Do not assume every small increase above normal output is automatically abnormal; that judgment needs context.

Use [Accountery’s accounting practice workspace](/practice) to practise recording entries and reviewing their effect alongside your course exercises. The numerical cases in this article can be worked independently on paper or in a spreadsheet; this invitation does not imply that these exact factory cases are available as graded exercises.

Keep an error log with three columns: the decision you made, the evidence you overlooked, and the correction. On the next attempt, review that explanation before checking the answer. A useful result is being able to explain both the unit cost and where every remaining riyal went.