# IAS 36 impairment reversal: Evidence, Ceiling and Journal Entries

> Calculate IAS 36 impairment reversal with two worked examples. Check eligibility, apply the carrying amount ceiling, post entries and update depreciation.

- Canonical page: https://accountery.app/learn/ias-36-impairment-reversal
- Language: English (en)
- Category: journal-entries
- Estimated reading time: 11 minutes
- Published: 2026-11-18
- Updated: 2026-11-18

## When does IAS 36 impairment reversal become supportable?

An IAS 36 impairment reversal begins with evidence that the estimates supporting an earlier loss have changed. A stronger sales month can prompt a review, but the accounting decision needs a supported recoverable amount and a separate ceiling calculation. Your task is to explain why recovery is supportable, how much can enter the accounts, and what happens to future depreciation.

This article follows that decision through two fictional Saudi businesses. Both use the cost model under IAS 16, straight-line depreciation, unchanged useful lives and unchanged residual values. Each asset generates largely independent cash inflows, so its recoverable amount can be assessed individually. All amounts are in SAR, and the calculations address accounting amounts without calculating tax effects.

At each reporting date, assess whether an earlier impairment loss on an asset other than goodwill may have decreased or ceased to exist. Where an indication exists, estimate recoverable amount. Paragraphs 110–116 in the [equivalent standard published by New Zealand’s External Reporting Board](https://standards.xrb.govt.nz/standards-navigator/nz-ias-36/) connect reversal to changed estimates; the passage of time alone does not justify reversal through the unwinding of discounted cash flows.

For background on the original loss, use our [asset impairment guide](/learn/impairment-of-assets-ias-36). Here, keep the review focused on the recovery decision. Start a short memo with the original impairment date, its main cause, the current evidence and the affected assumptions. Someone reading that memo should understand what changed before reaching the numerical schedule.

## What evidence supports an IAS 36 impairment reversal?

Suppose a packaging business previously lost a major customer. A replacement supply agreement may support higher expected cash inflows if its volumes, prices and delivery requirements are credible. Compare the agreement with available production capacity and updated operating costs. A signed contract supports the analysis, but its headline revenue does not establish the amount recoverable from the machine.

Useful evidence may include improved market prices, a sustained recovery in margins, lower relevant discount rates or better operating performance. Record which assumption each item supports. For example, a supplier quotation can support an input-cost estimate, while production logs can support an achievable output level. Keep the measurement date visible so that information from different periods is not combined without explanation.

Recoverable amount is the higher of value in use and fair value less costs of disposal. The [IFRS Foundation’s IAS 36 overview](https://www.ifrs.org/issued-standards/list-of-standards/ias-36-impairment-of-assets/) explains that basis and the prohibition on reversing [goodwill](/glossary#goodwill) impairment. A subsequent improvement in an acquired business therefore does not restore previously impaired goodwill.

For the examples below, recoverable amounts are supported estimates supplied independently of the depreciation worksheet. This means they are assessed separately from book values; it does not mean an external valuation specialist is automatically required. Avoid deriving recoverable amount by adding the desired reversal to the ledger balance.

Write a conclusion that connects evidence to measurement: which estimates changed, why the revised assumptions are reasonable, and which valuation basis determines recoverable amount. Keep optimistic operating plans distinguishable from supported assumptions about the asset’s current condition.

## How do you build the two-track depreciation worksheet?

Create two parallel columns from the acquisition date to the reversal date. The actual column follows the recorded impairment and subsequent [depreciation](/glossary#depreciation). The comparison column calculates what the carrying amount would have been if the impairment had never occurred. Both columns must end on the same date, after depreciation through that date.

The comparison column supplies the ceiling. Paragraphs 117 and 121 in the [Australian equivalent incorporating IAS 36](https://standards.aasb.gov.au/aasb-136-jan-2026-0) explain the ceiling and subsequent depreciation. The Australian and New Zealand texts provide access here to common IAS 36 requirements; their national provisions are not presented as Saudi law.

For an eligible reversal, apply this sequence:

- Establish actual carrying amount immediately before reversal.
- Calculate the no-impairment carrying amount at the same date.
- Take the lower of recoverable amount and that ceiling.
- Subtract actual carrying amount to determine the reversal, if positive.
- Recalculate future depreciation using the revised balance, residual value and remaining useful life.

If recoverable amount is below actual carrying amount, assess an additional impairment loss. Do not label a negative difference a reversal.

Use the [depreciation calculation guide](/learn/how-to-calculate-depreciation) if you need to rebuild the original schedule. In these examples, unchanged estimates make the comparison straightforward. A real change in useful life or residual value needs its own documented assessment.

Keep the original loss visible as historical information. It is not the current reversal ceiling. Lower depreciation after impairment changes the gap between the actual and comparison columns as time passes.

## Worked example 1: Najd Packaging reaches the ceiling

Fictional Najd Packaging purchases and makes a machine available for use on 1 January 2023 for SAR 600,000. It uses the cost model, a six-year useful life, zero residual value and straight-line depreciation. Those estimates remain unchanged throughout. The machine generates largely independent cash inflows.

Annual depreciation initially equals 600,000 ÷ 6 = 100,000. After depreciation on 31 December 2024, carrying amount is 400,000. A supported recoverable amount of 240,000 produces an impairment loss of 160,000. Four years remain, so depreciation for 2025 becomes 240,000 ÷ 4 = 60,000.

At 31 December 2025, after that depreciation, actual carrying amount is 180,000. Improved supported demand changes the cash-flow estimates, and a separate recoverability assessment establishes recoverable amount at 340,000.

| Date and calculation | Actual carrying amount | Without impairment |
|---|---|---|
| 1 January 2023: available for use | 600,000 | 600,000 |
| 31 December 2024: before impairment | 400,000 | 400,000 |
| 31 December 2024: after impairment | 240,000 | 400,000 |
| 31 December 2025: before reversal | 180,000 | 300,000 |
| 31 December 2025: after reversal | 300,000 | 300,000 |

The permitted closing amount is the lower of 340,000 and 300,000. Reversal therefore equals 300,000 − 180,000 = 120,000. The following entries use a separate accumulated impairment account:

| Date and account | Debit SAR | Credit SAR |
|---|---|---|
| 31 December 2024: impairment loss | 160,000 | 0 |
| 31 December 2024: accumulated impairment | 0 | 160,000 |
| 31 December 2025: accumulated impairment | 120,000 | 0 |
| 31 December 2025: impairment reversal income | 0 | 120,000 |

Three years remain from 1 January 2026. Prospective annual depreciation is 300,000 ÷ 3 = 100,000, leaving 200,000 at 31 December 2026 absent further changes.

The original loss was 160,000, but subsequent depreciation was 40,000 lower than the no-impairment charge. Restoring the full historical loss would exceed the current ceiling by that 40,000.

## Worked example 2: Gulf Cold Storage records a partial reversal

Fictional Gulf Cold Storage acquires independently cash-generating equipment and makes it available for use on 1 January 2023 for SAR 900,000. It applies the cost model and straight-line depreciation over five years, with a residual value of 100,000. Useful life and residual value remain unchanged.

Original annual depreciation is (900,000 − 100,000) ÷ 5 = 160,000. After two years, carrying amount on 31 December 2024 is 580,000. An independently assessed recoverable amount of 400,000 requires an impairment loss of 180,000. Depreciation for 2025 becomes (400,000 − 100,000) ÷ 3 = 100,000.

At 31 December 2025, after depreciation, actual carrying amount is 300,000. Supported improvements in storage-service demand change the recoverability estimates. The separately assessed recoverable amount is now 380,000.

| Measurement at 31 December 2025 | SAR |
|---|---|
| Actual carrying amount before reversal | 300,000 |
| Ceiling: 900,000 − three years × 160,000 | 420,000 |
| Recoverable amount | 380,000 |
| Revised carrying amount | 380,000 |
| Reversal: 380,000 − 300,000 | 80,000 |

| Date and account | Debit SAR | Credit SAR |
|---|---|---|
| 31 December 2024: impairment loss | 180,000 | 0 |
| 31 December 2024: accumulated impairment | 0 | 180,000 |
| 31 December 2025: accumulated impairment | 80,000 | 0 |
| 31 December 2025: impairment reversal income | 0 | 80,000 |

From 1 January 2026, two years remain. Annual depreciation becomes (380,000 − 100,000) ÷ 2 = 140,000. Carrying amount at 31 December 2026 is therefore 240,000, assuming no further changes.

Here recoverable amount limits the reversal before the ceiling is reached. For a separate variation, replace recoverable amount with 470,000. The ceiling then limits closing carrying amount to 420,000, reversal becomes 120,000, and annual depreciation becomes 160,000. The original case and variation have identical asset histories; only the current recovery estimate changes.

## How do you post the reversal and review next year’s balance?

For these cost-model assets, recognize the reversal in profit or loss. A [journal entry](/glossary#journal-entry) debiting accumulated impairment and crediting impairment reversal income increases the net asset balance without changing historical cost. Revalued assets require the relevant revaluation treatment, so the examples should not be transferred unchanged to that model.

After posting, reconcile cost, accumulated depreciation and accumulated impairment. Najd’s 31 December 2025 balance is 600,000 − 260,000 − 40,000 = 300,000. Gulf’s corresponding balance is 900,000 − 420,000 − 100,000 = 380,000. A remaining accumulated impairment balance can coexist with Najd’s net carrying amount having reached its ceiling because historical depreciation followed different amounts.

Update the asset register from 1 January 2026. Najd’s annual charge is 100,000 and Gulf’s is 140,000. Under the simplified expense presentation, debit depreciation expense and credit accumulated depreciation for those amounts. Leave the depreciation already recorded for 2025 intact.

Prepare a review file that connects the calculation to its evidence:

- Asset identity, availability date, accounting model and original cost.
- Original impairment memo and supporting ledger entry.
- Current indicators and the specific assumptions they change.
- Recoverable amount assessment and supporting inputs.
- Both depreciation tracks and the ceiling calculation.
- Posted reversal, register update and next-year depreciation.
- Relevant disclosure assessment and reviewer sign-off.

Include who prepared each estimate and when it was reviewed. Document missing evidence explicitly. An approval signature helps establish responsibility, while the underlying records explain whether the accounting conclusion is supportable.

## Which common mistakes change the reversal amount?

Several errors produce balanced entries and still misstate the asset. Review the measurement sequence before checking account codes.

- **Reversing the original loss automatically.** Najd’s historical loss is 160,000, while its permitted reversal is 120,000. Rebuild the current ceiling rather than copying the old entry backwards.
- **Comparing different dates.** Using a ceiling before current-year depreciation with an actual balance after depreciation exaggerates available headroom. Label both columns with the same reporting date.
- **Treating the ceiling as the target.** Gulf’s ceiling is 420,000, but recoverable amount supports only 380,000. Raising the balance to the ceiling would overstate both assets and reversal income by 40,000.
- **Rewriting past depreciation.** The changed carrying amount affects subsequent charges. Najd keeps its 2025 depreciation of 60,000 and applies 100,000 annually from 2026 under the stated facts.
- **Ignoring residual value.** Gulf depreciates 280,000 over its remaining two years after reversal. Dividing the full 380,000 by two would overstate annual depreciation by 50,000.
- **Using an unsupported recovery story.** Better sentiment should lead to evidence gathering and updated estimates. It does not supply a posting amount.

Also confirm the level of assessment. These examples concern individually assessable assets. For a cash-generating unit, reversal allocation follows additional limits: allocate to assets other than goodwill proportionately to carrying amounts, subject to individual ceilings and recoverable amounts where determinable. Paragraphs 122–125 address those requirements.

Ask a colleague to identify the limiting number without seeing your final entry. If that explanation differs from yours, resolve the measurement issue before posting.

## How can you practise the decision and the follow-through?

Rebuild both examples on a blank worksheet. Write the dated history first, then calculate the actual and no-impairment columns. Cover the supplied answers until you have selected the lower of recoverable amount and ceiling. Finish each attempt with the reversal entry and next year’s closing carrying amount.

Change one assumption at a time. For Najd, use a recoverable amount of 260,000 at 31 December 2025 while retaining the supported change in estimates. The reversal becomes 80,000, closing carrying amount becomes 260,000, and depreciation over three remaining years becomes approximately 86,666.67 annually. State your rounding convention and adjust the final year if necessary.

For Gulf, use a recoverable amount of 300,000. There is no reversal because it equals actual carrying amount. Annual depreciation remains (300,000 − 100,000) ÷ 2 = 100,000. Then test 470,000 and explain why the reversal stops at 120,000 despite the higher recovery estimate.

Add an evidence exercise alongside the arithmetic. Imagine that the replacement customer agreement is still an unsigned proposal. Identify which assumptions need further support and whether other available evidence supports the estimate. Avoid making the signature itself a universal recognition test.

Use Accountery’s [accounting practice workspace](/practice) to practise recording and reviewing entries alongside your course or workplace training. Keep these cases as your own worksheet exercises. After each attempt, explain the changed estimate, the limiting amount and the prospective charge in three short sentences. A complete answer lets another accountant trace the decision from evidence through the ledger to next year’s asset balance.

---

Educational content from Accountery. Verify current standards, regulations, and authoritative sources before professional use.
